XRAY XT2 2024

XRAY XT2 2024

XRAY 320208 XRAY XT2C’24 CARPET EDITION

XRAY 320209 XRAY XT2D’24 DIRT EDITION

Bestellung hier

Link zu allen Details beim Hersteller

Sämtliche Details vom XRAY XT2 2024 Bausatz finden Sie unter dem Link auf der Seite des Herstellers. Viele großartige Fotos. Der Bauplan steht bereit im Download Bereich für Sie. Das Modell kann auch bei uns im Geschäft angeschaut werden. Wie immer auch von diesem Modell sind sämtliche Ersatzteile an Lager. Options Parts für Einstellung und Abstimmung vom Chassis sind ebenfalls vorhanden.

XRAY X4F 2025

XRAY X4F 2025

Artikel Nummer 300204

Bestellung hier 

X4F 2024 Ausverkauf solange Vorrat

Link zu allen Details beim Hersteller

Sämtliche Details vom XRAY X4F 2024 Bausatz finden Sie unter dem Link auf der Seite vom Hersteller. Viele tolle Fotos. Der Bauplan steht bereit im Download Bereich für Sie. Das Modell kann auch bei uns im Geschäft angeschaut werden. Wie immer auch von diesem Modell sind sämtliche Ersatzteile an Lager. Options Parts für Einstellung und Abstimmung vom Chassis sind ebenfalls vorhanden.

 

XRAY X8

XRAY X8

Das neue PAN Car XRAY X8 

Bestellung hier

Link zu allen Details beim Hersteller

 

Sämtliche Details vom XRAY X8 Bausatz finden Sie unter dem Link auf der Seite des Herstellers. Viele großartige Fotos. Der Bauplan steht bereit im Download Bereich für Sie. Das Modell kann auch bei uns im Geschäft angeschaut werden. Wie immer auch von diesem Modell sind sämtliche Ersatzteile an Lager. Options Parts für Einstellung und Abstimmung vom Chassis sind ebenfalls vorhanden.

 

XRAY On Podium At Swiss Nationals Round 2

2nd Round of Swiss National – Langenthal

Luckily it was a sunny and warm race weekend at Simon Kurzbuch’s home track.
During the few practice sessions on Friday we managed to find a good setup for both the RX8 and the NT1.

On Saturday morning the track was a little different but we were still competitive. Qualifying was a bit tricky, especially for Mattia who was unable to finish two out of four qualifying sessions. Fortunately, in the last two he managed to do well and finish qualifying in fifth place.

In the 1/10, Schaer’s performance was excellent, taking pole position and Buhler in third.
On Sunday Mattia managed to get through to the final, after a semi-final where he risked ending it prematurely due to a collision with a lapped driver. In the final Mattia got off to a strong start and immediately took third place behind Haechler and Kurzbuch. Unfortunately, after a few minutes the engine started to run a bit lean in the carburetion and he lost third position. After a little over 20 minutes of racing, however, the engine suddenly died, causing the filament to drop. After that it was decided to end the race so as not to completely compromise the engine.
In the 1/10 Schaer got off to a strong start, but unfortunately ran out of fuel and dropped back a few positions. He still managed to climb up to second position. Halfway through the race, unfortunately after a small crash he broke a tyre, forcing him to change tyres a second time. This caused him to lose a lot of time and he finished the race in fourth position. A very good performance by Buhler Philipp who finished the race in second position.

1/10 nitro results: 

1. Stefan Wuthrich
2. Philipp Buhler – XRAY NT1
3. Manfred Ebener

Report XRAY

X4 And X1 Win At Swiss Championship

Race report by Boris Siladi and photos by Darco Meister
Swiss Championship Rd. 1 Chiasso April 20-21, 2024

The race in Chiasso was held with a total of 81 participants in 7 different categories. The weather gods were kind to all of us and we were able to start the first race of the 2024 season with sunny weather at around 20°C.
The MRC Chiasso had prepared the race track perfectly and done everything to ensure that things ran smoothly. The club in Chiasso is doing a great job, a big thank you to the club!
The Xray team was in various classes, including classes:
F1, Stock 17.5T Touringcar, Modified Touringcar and Stock 13.5T Touringcar

Formula results:
1. Urs Burkhard – XRAY X1
2. Mischa Zysset – XRAY X1
3. Michael Hauptli – XRAY X1
Stock 17.5T results:
1. Valentino Malighetti – XRAY X4
2. Rico Becker – XRAY X4

3. Markus Willinger
Modified results:
1. Michele Manzo
2. Philipp Huber
3. Boris Siladi – XRAY X4
Stock 13.5T results:
1. Simone Catenazzi
2. Luca Martinelli
3. Darco Meister – XRAY X4

Report XRAY

XB4 Wins At Swiss Off-Road Nationals, Round 3

Report by Florian Schmid
The 3rd Round of Swiss nats Are in the Books. It was held on the bumpy astrotrack in Wollerau.

The Day startet rainy with some wet practice. Our Xray XB4 with the rain set-up worked well from the first run. In Q3 and Q4 the Track was getting drier and drier. The desicion which tires we will choose was difficult. In Q4 we decided to run on the yellow mini dart. The Tire was way to aggressive and it was not possible to Do a clean 5 Minute run. so we wasn’t able to catch the TQ spot. After the Quali runs we was standing on P2 (Nico) and P3 (Florian) for the triple A-mains.

In the Mains the Track was completely Dry and fast. And our Xray XB4 worked amazing on this difficult track. With a win in A1 and A3 it was Florian who was able to secure the overall win. Nico enden up on P4 with little bit unlucky Mains.

Big thank you to the Club EMBCM for this nice weekend.

And last but not least, thanks our Sponsors for Their generous support.

Results: 1. Florian Schmid – XRAY XB4
2. Fabian Widmer
3. Fabian Luca Widmer

Report XRAY

XB8E Wins At Swiss Off-Road Championships, Round 2

Report by Philip Jeisy
The first round of the E8OR Swiss Championship 2024 took place at the astro track of the “RC Racing Club Arlesheim”.
There were two separate races on Saturday and Sunday.

I had a pretty good starting setup from the last training weekend so I could push the car from the very first round of the day. After some solid qualification rounds (and some setup advices), I placed my car on the second spot of the grid just behind Patrick Hofer and in front of Marco Rytz.
In the first and second A-main I always struggled with the double jump at the beginning of the straight, so I had the work much harder than I wanted to gain some spots. With a good 10 minutes run in the last A3-main I finished 2nd overall at the first race on Saturday just behind Patrick Hofer who was unbeatable. Very impressive drive!

The race on Sunday didn’t start as I expected: the last group of the first quali group was affected by some rain drops, so it wasn’t possible to reach a good position. After a pretty bad first qualy I could place my XB8E 2024 on the third spot of the grid.
The first A-main couldn’t work better for me: after some bad luck with a DNF of Patrick Hofer I could win the first main just in front of Noah Kaufmann, who had a really good pace on this high grip astro track. In the second main the positions swapped so I finished in second place, just behind Noah. The final and third round went perfect for me so I could bring home A3 and the overall victory on Sunday in front of Noah in second and Patrick on the third spot.

In conclusion, the weekend was just ideal for me. The XB8E 2024 worked perfect, the atmosphere on and off the track was great and the club did an excellent job.
A big thanks goes the guys to right and to my left (of the pit table). Thanks for all the support during the weekend and throughout the whole season! Results like that wouldn’t be possible without you.

Results:

1. Philip Jeisy – XRAY XB8E
2. Noah Kaufmann
3. Patrick Hofer

Report XRAY

RX8 Wins At Swiss On-Road Championships, Round 1

Report by Mattia Pesenti
First Swiss Championship race – Lostallo
Once again this year the first Swiss championship race took place on the Lostallo track. The weather forecast was not the best and predicted rain for the whole weekend.
On Friday, the rain allowed us to test very little, and on Saturday we managed to run only one dry qualifying session for the 1/8 and two for the 1/10.
On Sunday for the finals, the weather was no better. It rained until the start of the 1/10 final, but it never dried out. In 1/10 Schär took the lead immediately on the first lap ahead of Fankhauser. Unfortunately, a flameout at the first refuelling caused him to lose the lead he had gained at the start of the race. However, he returned to the track still leading the race, but unfortunately after 10min of domination he lost control and ended up in the grass. He rejoined the track in third place, then managed to regain second place, only to lose it towards the end of the race. With the track becoming less and less wet, Traugott’s tyres took the blow.
The 1/8 final also took place in wet track conditions, there was some doubt about which car to use (wet or dry car. The Swiss regulations allow for 2 cars to be ready). Many opted for the dry car with wet tyres, but Pesenti decided to run with the wet car with wet tyres. In fact, the track never dried out and Pesenti took the lead after the first few corners and finished the final without making any mistakes.
Great performance by XRAY during this race, who placed no less than four models in the final. Congratulations also to Heiniger Beat (our Bax Verstappen), Cannas Roberto and Michele Cona.
The next race will be at the Langenthal track on 11/12 May 2024.
Results 1/8:
1. Pesenti Mattia – XRAY RX8 ’23 / FX
2. Hasler Remy
3. Kurzbuch Christian
Results 1/10:
1. Fankhauser Patrick
2. Wutrich Stefan
3. Schar Traugott – XRAY NT1 ’23 / FX

Report XRAY

XRAY GTXE 2024

XRAY GTXE 2024

Bestellung hier

Link zu allen Details beim Hersteller

 

Sämtliche Details vom XRAY GTXE 2024 Bausatz finden Sie unter dem Link auf der Seite des Herstellers. Viele großartige Fotos. Der Bauplan steht bereit im Download Bereich für Sie. Das Modell kann auch bei uns im Geschäft angeschaut werden. Wie immer auch von diesem Modell sind sämtliche Ersatzteile an Lager. Options Parts für Einstellung und Abstimmung vom Chassis sind ebenfalls vorhanden.

 

XRAY GTX8 2024

XRAY GTX8 2024

Bestellung hier

Link zu allen Details beim Hersteller

Sämtliche Details vom XRAY GTX8 2024 Bausatz finden Sie unter dem Link auf der Seite des Herstellers. Viele großartige Fotos. Der Bauplan steht bereit im Download Bereich für Sie. Das Modell kann auch bei uns im Geschäft angeschaut werden. Wie immer auch von diesem Modell sind sämtliche Ersatzteile an Lager. Options Parts für Einstellung und Abstimmung vom Chassis sind ebenfalls vorhanden.